Glittered EasySculpt Pumpkin

one was this pumpkin silcone mold for candy...it came packaged with two of them, so the first thing I did was mark the back of them, one with Craft Room, the other I marked Food Safe.  This is so that I would have one to use in the kitchen if I ever wanted to, as once you use molds with resins and clay, they would no longer be food safe, so this is an important step.

I thought I would make some resin pumpkins for thanksgiving but first I wanted to try the molds with EasySculpt® Self Hardening Epoxy Molding Clay.  

I started by spraying the mold with Mold Release and gathered my supplies. 

I measured out equal amounts of of A and B.

I mixed them together until I had a uniform color.

I placed the mixture into the mold.  I pushed the clay in firmly.

I wanted to use the back side of the mold, as I did not want the faces, I only wanted the pumpkin shape.

I applied glitter to the back side.

I used orange for the pumpkin and green for the stems...I rubbed the glitter in a bit with a paint brush.

I let the pumpkins set up for about 30 minutes...which made it easier to remove them from the mold.

I like how they turned out...this was a quick and easy project!