Jewelry Clay Transfer Pendant

 Yesterday I posted the results of my clay transfer experimentsNow I am going to show you why you will 
want to do a few transfers too!
 This project uses my two best friends; Envirotex Jewelry Clay and Jewelry Resin.
 Together, you can easily create jewelry like this!
 Here is my transfer paper sitting on my clay.
 What I did.
1.  My Print 'n Press transfer paper has been rubbed onto the surface of my clay and allowed to cure in place overnight.
2.  I added a screw eye to my clay so that it will be a pendant immediately.  See transfer post for this technique.
3.  My clay is curing on a non stick polymer clay stamp sheet.
 See how the stamp sheet made all these permanent impressions?  I peeled the clay off after it cured overnight.
 Then I peeled off the transfer paper.  
This is the sheet of images I chose from.
 I applied two glaze layer of Jewelry Resin.  This is the first glaze layer.  See how the transfer looks brighter and darker?  Resin always magnifies the colour t is brushed on.  I did two glaze layers to make it extra glossy.  Also, note that I did not add additional colour to the clay on this side.  
This is the ivory colour the clay is already.
 I used metallic wax to colour the reverse side.

Labels: , , , , , ,